How To Update Usb Drivers Windows 7

Reinstalling USB Driver on Windows seven

Follow the steps below to manually install the USB driver using the Windows 7 Device Manager.

one. Right click on [My Computer] and select [Open]. Click [System properties], and open the [Device Director].

Right click on [My Computer] and select [Open] Click [System properties] open the [Device Manager]

ii. Connect the data logger or data collector to your PC with a USB cablevision. If the PC does non recognize the recently connected device, an [Unknown device] message will appear.

[Unknown device] message will appear

* If that message does non appear, please check to make sure there are batteries in the continued device or that the device's power is ON. If the message notwithstanding does not appear, it is possible that something is incorrect with the USB final on the PC or on the device, or a broken wire in the USB cable.
* If the driver has been installed properly [USB Recorder Com] volition appear in the device manager as shown in Step 7 below. (For TR-7Ui/7wf/7nw)

iii. Right click on [Unknown device] and select [Update Driver Software(P)].

Right click on [Unknown device]

iv. Later on the "Update Commuter Software" window has appeared, click "Browse my computer for driver software".

click Browse my computer for driver software

5. Specify the location of the device driver. Side by side depending on the circumstances select one of the following:

A: Select to install the driver from CD-ROM
B: Select to install from the folder where the software was installed on your PC

A: Installing the driver from CD-ROM

Click the [Scan] button and notice the CD-ROM drive; then select the binder entitled [Device Driver].

Click the [Browse] button find the CD-ROM drive; then select the folder entitled [Device Driver]

For example, if the CD ROM bulldoze is "D:" so information technology should be "D: Device Driver". If you are using RTR-57U, and then select the folder [RTR-57U] and if you lot are using TR-50U then select the binder [TR-50U].

B: Installing from the folder where the software was installed

Click the [Browse] button and select the driver folder for the device from the folder into which the software was installed (if RTR-50 and then select [Commuter RTR-50]).

Click the [Browse] button and select the driver folder into which the software was installed

EX: C:\Program Files\RTR-l for Windows\Commuter RTR-50
* Place a cheque next to "Include subfolders".

6. By clicking [Next], a confirmation window similar the one below volition appear. Click [Install]. After the message "Windows has successfully updated driver software" appears, click [Close].

Click [Install] After the message 'Windows has successfully updated driver software' appears, click [Close]

seven. Confirm in the Device Manager that the brandish looks similar beneath. If in that location is no trouble, so the driver has been installed properly.

TR-7Ui Series, TR-7wf/nw Series

TR-50U2, TR-57DCi

That completes the installation.
Delight reconfirm that communication via USB can be carried out.

Dorsum to Other Information